• 電話
    聯系我們
    CONTACT US
    傳真:0531-86370030
    郵箱:870027617@qq.com
    地址:濟南解放東路29號
    知識專欄
    您當前所在的位置:首頁 - 新聞資訊 > 知識專欄 >
    怎么處理防腐木變形問題?

    來源:http://www.thecysterstory.com 時間:2022-04-11

    防腐木廠家防腐木的外部質量特別好,掃除外力積壓的問題,那么就是內在的壓力會導致變形了。假如防腐木內部的水分過高,一起沒有經過烘干,之后長期的處于自然條件下,自然而然會由干變濕,外表先干,之后內部慢慢邊干。
    The external quality of anticorrosive wood from anticorrosive wood manufacturers is particularly good. To eliminate the backlog of external forces, the internal pressure will lead to deformation. If the moisture inside the anti-corrosion wood is too high and has not been dried together, it will naturally change from dry to wet under natural conditions for a long time. The appearance will dry first, and then the interior will dry slowly.
    因為木材沒有延伸性,所以外表干的時分,外表積就會變小,但是內部沒有干,體積仍是那么大,那么外表積的縮小,只能經過開裂和變形來保持平衡。木材之所以變形是由內部壓力引起的,而木材開裂則是因為木材外表起了新改變,但改變的根本原因在于木材內部的含水率發生了改變。
    Because the wood has no extensibility, when the surface is dry, the surface area will become smaller, but when the interior is not dry, the volume is still so large, so the reduction of the surface area can only be balanced through cracking and deformation. Wood deformation is caused by internal pressure, and wood cracking is due to new changes in the appearance of wood, but the fundamental reason for the change is that the moisture content in the wood has changed.
    那么咱們該怎么處理防腐木變形的問題,防腐木廠家告訴您。
    So how should we deal with the deformation of anti-corrosion wood? The manufacturer of anti-corrosion wood will tell you.
    1、在建設之前盡量要等到防腐木干到標準值了之后再運用。
    1. Before construction, try to wait until the anticorrosive wood is dry to the standard value before using it.
    2、在建設的過程中做好防護作業,不能讓過多的水分進入到南京防腐木中,應該注意到防潮的問題。
    2. In the process of construction, do a good job of protection, do not let too much water into Nanjing anti-corrosion wood, and pay attention to the problem of moisture-proof.
    3、挑選質優涂料,畢竟只要好的涂料才能做好相應的防潮作業,假如涂層呈現破損,一定要及時修補。
    3. Select high-quality coatings. After all, only good coatings can do the corresponding moisture-proof operation. If the coating is damaged, it must be repaired in time.
    4、在鋪設防腐木的時分,通常都是需求做成留有一定份額縫隙的產品。當然在運用的時分防止溫度忽高忽低,要保持溫度的均衡,對于夏日或許冬天要注意及時降溫或許取暖。
    4. When laying anticorrosive wood, it is usually required to make products with a certain share of gaps. Of course, in the use of time to prevent the temperature from rising and falling, to maintain a balanced temperature, for summer or winter, we should pay attention to timely cooling or heating.
    防腐木地板能夠很好的飽嘗相對惡劣性的環境,不用去費心打理,這也是受到消費者喜愛的原因。當然在挑選的時分,咱們要注意購買質量合格的產品。
    Anticorrosive wood flooring can well experience the relatively harsh environment without taking care of it, which is also the reason why it is loved by consumers. Of course, when choosing, we should pay attention to buying products of qualified quality.
    以上就是為大家介紹的有關濟南防腐木的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務http://www.thecysterstory.com
    The above is the detailed introduction of Jinan antiseptic wood. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.thecysterstory.com