• 電話
    聯系我們
    CONTACT US
    傳真:0531-86370030
    郵箱:870027617@qq.com
    地址:濟南解放東路29號
    知識專欄
    您當前所在的位置:首頁 - 新聞資訊 > 知識專欄 >
    建造防腐木亭子的注意事項

    來源:http://www.thecysterstory.com 時間:2021-05-28

    防腐木涼亭是用防腐木組建而成,防腐木是將木材經過特殊防腐處理后,具有防腐爛、防白蟻、防真 菌的功效。同時還能抑 制處理木材含水率的變化,減少木材開裂的程度。
    The antiseptic wood Pavilion is made of antiseptic wood. Antiseptic wood has the functions of antiseptic, termite and fungus after special antiseptic treatment. At the same time, it can inhibit the change of moisture content of treated wood and reduce the degree of wood cracking.
    能夠直接接觸土壤及潮濕環境,經常使用在戶外地板,工程,景觀,防腐木花架等,供人們歇息和欣賞自然美景,是戶外地板、園林景觀、木秋千,娛樂設施,木棧道等里理想材料。而防腐木涼亭也越來越走進人們的家庭,那建造時應該注意什么呢?
    It can directly contact with soil and humid environment, and is often used in outdoor floor, engineering, landscape, antiseptic wooden flower rack, etc. for people to rest and enjoy natural beauty. It is an ideal material for outdoor floor, garden landscape, wooden swing, entertainment facilities, wooden plank road, etc. And antiseptic wood Pavilion is more and more into people's families, so what should be paid attention to when building?
    1、所有的連接應使用鍍鋅連接件或不銹鋼連接件及五金制品,以抗腐蝕,不能使用不同金屬件,否則很快會生銹,使木制品結構受到根本損傷。
    1. Galvanized or stainless steel connectors and hardware products shall be used for all connections to resist corrosion. Different metal parts shall not be used, otherwise it will rust quickly and cause fundamental damage to the wood structure.
    2、在制作和穿孔的過程中,應先用電鉆打眼,然后用螺絲等固定,以免造成 人為的開裂。
    2. In the process of production and perforation, electric drill should be used to drill holes first, and then fixed with screws, so as to avoid artificial cracking.
    3、待木材干燥或風干后在其表面上使用木材防護漆進行涂刷。使用戶外木材專用漆時應注意首先要充分搖勻,涂飾后需24小時的晴天條件,使涂料在木材表面成膜。
    3. After the wood is dried or air dried, the wood protective paint shall be applied on the surface. When using outdoor wood special paint, it should be noted that first of all, it should be fully shaken. After finishing, it needs 24 hours of sunny conditions to make the paint film on the surface of wood.
    4、防腐木在運到施工現場時,應通風存放并盡可能的避免陽光暴曬直射。在防腐木木屋設計施工時,應盡可能全角和防腐木材料現有的尺寸如需切割、鉆孔等,要使用防腐劑進行涂刷補救,以保證仿防腐層的完整性。在連接時應預孔,這樣可以減少開裂。
    4. When the anticorrosive wood is transported to the construction site, it should be stored in ventilation and avoid direct sunlight as far as possible. In the design and construction of the anti-corrosion wooden house, the full angle and the existing size of the anti-corrosion wood materials should be used as far as possible. If cutting, drilling, etc. are needed, preservatives should be used to brush and repair, so as to ensure the integrity of the anti-corrosion coating. Holes should be pre drilled during connection to reduce cracking.
    5、搭建防腐木棧道、地板、露臺時,盡量使用長木板,減少接頭,以求美觀,板面之間留5-10mm縫隙。亭子的所有連接點請使用鍍鋅緊固件,或不銹鋼及五金,防止生銹而造成防腐劑流失。
    5. When building anti-corrosion wood plank road, floor and terrace, try to use long boards to reduce joints, so as to be beautiful, and leave 5-10mm gap between the boards. Please use galvanized fasteners, stainless steel and hardware at all connection points of pavilion to prevent corrosion and corrosion.