Anticorrosive wood products have good quality and reasonable price, which are deeply trusted and praised by customers. The following is a simple answer to the need for water replenishment of Chongqing's antiseptic wood in winter:
Solid wood floor: in fact, the solid wood floor is most vulnerable to external environment interference. When the humidity and temperature change, it is most likely to show deformation, cracking and other phenomena.
Cork floor: cork floor gives people the most comfortable foot, and its enemy is sand.
It is windy and sandy in winter. When using it, sand particles shall not be brought into the room to avoid damaging the appearance of cork floor.
Aggrandizement wood floor: winter climate is cold and dry, should maintain the moisture content in aggrandizement wood floor, can often wipe with wet mop, in order to increase the appearance humidity.
Winter climate is dry, solid wood flooring will shrink due to loss of water, splicing gap increases; we have to solid wood floor "Mask" to play solid wax, it is recommended to wax two times a year.
If the laminate floor is "chapped", it is generally recommended to ask professional maintenance personnel for maintenance "water supplement" and other treatment.
After reading the above answer, I believe that you need to replenish water for Chongqing anti-corrosion wood in winter.
Precautions for the use of anticorrosive wood: at the construction site, the anticorrosive wood shall be ventilated and stored to prevent the sun exposure as much as possible. Please use hot dip galvanized fasteners, maybe stainless steel and hardware for all connection points. If further maintenance of wood is needed, wood paint can be painted to reduce cracking, but it is necessary to wait for the wood to dry in the future. Equipment operation of CCA anticorrosive wood: it is recommended that the staff wear gloves, wash hands before eating, and do not burn the discarded wood or saw foam. During construction, the existing standards of anticorrosive wood can be used as much as possible, such as cutting, drilling, etc. it is necessary to use CCA preservative to brush and make up, so as to ensure the service life of anticorrosive wood. When setting up the roof, try to use long plank to cut the joint to make it beautiful; leave 5-10 mm gap between the boards.
Principle of safe use of anti-corrosion wood: after all, the anti-corrosion wood is made of chemicals, and there will be residual chemicals. This is very normal. When our workers are installing or dying of faintness, they must have protective equipment to keep the pollution away from the human body. Here is a brief introduction to the safety protection of anti-corrosion wood. When touching the antiseptic wood, especially the products just coming out of the sound field, the antiseptic has not volatilized completely. In order to prevent direct skin touch, gloves should be worn when handling the antiseptic wood. Secondly, the anti-corrosion wood must be prevented from entering the body. The protection method is to wear a mask when using electric saw or machining, and wear goggles to protect eyes from flying particles. After finishing processing again, it must be cleaned. After touching the skin, it should be washed with soap water. In the end, do not burn the antiseptic wood and keep the adulterated wood in the house clean.