Antiseptic wood is generally used in balconies, courtyards and gardens at home. Although it is anti-corrosion wood, we can't forget the basic maintenance work. In the construction and later maintenance of anti-corrosion wood, if correct methods are taken, its service life will be greatly prolonged.
Select hardware connection that is not easy to rust. The hardware shall be made of stainless steel, hot-dip galvanized or copper to avoid rust and corrosion in the future and affect the connection fastness. Please drill holes in advance during connection and installation to avoid cracking of anti-corrosion wood.
Apply protective coating after installation. The damaged part of anti-corrosion wood processing shall be painted with preservative and outdoor protective coating. Since the anticorrosive wood itself is a semi-finished product, the rough part can be sanded again after the wood moisture content is reduced to less than 20%. If you want to have better effect, you can also brush outdoor protective coating after the surface is cleaned.
Pay attention to the protection of finished products. After the anticorrosive wood surface is painted with outdoor protective coating or oil-based coating, in order to achieve good results, avoid personnel walking or heavy objects moving within 48 hours, so as not to damage the protective film formed on the anticorrosive wood surface. If you want to achieve better anti dirt effect, if necessary, the surface layer shall be treated with two layers of special outdoor varnish.
Clean in time and wax regularly. The surface of anticorrosive wood can be cleaned with general detergent and tools can be brushed; In later use, it is necessary to protect the anti-corrosion wood surface with wood wax oil regularly, generally at an interval of one to one and a half years, so as to enhance the waterproof and antifouling performance of the surface.