In order to protect the antiseptic wood, we should master the correct method to get better effect. The coatings shall not be mixed, and shall not be used as topcoat or primer on the anticorrosive wood Pavilion. Brushing should not be more than twice. The hydrophobic effect can take effect after the surface is dry; it takes about half a month to enhance the hardness when brushing, and 3-4 days to enhance the hardness when wiping. If there is old paint on the surface of anticorrosive wood, it must be removed. For outdoor use, you can use weathering wood oil first.
In addition, it should be noted that when waxing wood products at 20 degrees of moderate air humidity, it should be surface dry for about 4 hours, re coated after 12 hours, and then dried after 15 hours; for wood with heavy oil content, the drying time will be prolonged when the temperature is low and wet.
In order to prevent cracking and deformation in advance, Jinan anti-corrosion wood manufacturers suggest that preservatives should be applied on the surface of wood, which can prevent the invasion of diseases and insect pests in the harsh environment, and then extend the service life of wood. The preservatives with better effect in preventing water penetration in Quanzhou anti-corrosion wood house will certainly have a good effect.
Jinan antiseptic wood products, such as the location, sunlight, humidity caused by natural phenomena such as rain, are easy to cause deformation and cracking. I can't change the natural conditions. The cracking and deformation of antiseptic wood products will be affected by many other factors. However, it can be controlled and prevented in the construction. The exterior Quanzhou antiseptic wooden house surface of antiseptic wood products is the most reliable part with the best quality and performance. Therefore, polishing and profiling of antiseptic wood waste products should be reduced as far as possible. This can effectively reduce and delay the time period of deformation and cracking.
Jinan anticorrosive wood maintenance, because the water-based coating has a strong permeability, so in the coloring, it can play a very good role in coloring, so when the brushing effect is very good? It is advocated that the preservative of anticorrosive wood is almost steamed after half a year after the construction of anticorrosive wood, so that it can be used for penetration and coloring.