• 電話
    聯系我們
    CONTACT US
    傳真:0531-86370030
    郵箱:870027617@qq.com
    地址:濟南解放東路29號
    熱點問題
    您當前所在的位置:首頁 - 新聞資訊 > 熱點問題 >
    了解該花架的生產質量要素

    來源:http://www.thecysterstory.com 時間:2021-02-22

    隨著社會的發展,人們對于環境裝飾方面要求的不斷提高,越來越多的地方開始使用到防腐木花架,具有比較好的防腐和防蟲的效果,得到了人們的喜愛。同時您對于該產品的好壞有所鑒別嗎?所以就先讓小編給您來簡單介紹一下生產質量要素吧。
    With the development of society, people's requirements for environmental decoration continue to improve, more and more places began to use anti-corrosion wooden flower rack, with better anti-corrosion and anti insect effect, has been loved by people. At the same time, do you know whether the product is good or bad? So let me give you a brief introduction of production quality factors.
    偽劣防腐木材的生產行為:
    The production behavior of fake and inferior wood is as follows
    1.不進行防腐前干燥工序,使防腐劑只能夠達到表面,不能夠到達邊材透,安裝使用后也很容易變形開裂。
    1. Do not carry out the drying process before anti-corrosion, so that the preservative can only reach the surface, not the sapwood, and it is easy to deform and crack after installation and use.
    2.不進行脫脂處理,安裝后在夏天出現松油外流影響美觀,污染環境,更嚴重的是會成為有機生物侵蝕木材的突破口。
    2. Without degreasing treatment, pine oil will flow out in summer after installation, which will affect the appearance and pollute the environment. What's more, it will become a breakthrough for organic organisms to erode wood.
    3.手工刨光,手工刨光會節約加工余量,降低材料成本,但加工大面凹凸不平,安裝誤差大。
    3. Manual planing, manual planing will save processing allowance and reduce material cost, but the processing surface is uneven and the installation error is large.
    4.土法生產或購買劣質不穩定的防腐劑、甚至使用仿防腐劑顏色的染料。
    4. Indigenous production or purchase of low-quality and unstable preservatives, or even use of dyes imitating preservative color.
    5.生產過程中循環使用的防腐劑儲存,使防腐劑在長期與水泥、空氣浮塵接觸對防腐劑質量影響大。
    5. The preservatives that are recycled in the production process are stored, so that the preservatives are in long-term contact with cement and air floating dust, which has a great impact on the quality of preservatives.
    6.防腐工藝為涂刷、常溫浸泡,提高不了防腐劑的滲透度和固體含量,沒有防腐效果。
    6. The anti-corrosion process is brushing and soaking at room temperature, which can not improve the permeability and solid content of the preservative and has no anti-corrosion effect.
    合格防腐木生產要素:
    Production factors of qualified preservative wood:
    1.嚴格按照該材種的干燥曲線進行干燥處理。
    1. Strictly follow the drying curve of the wood.
    2.嚴格按照脫脂工藝進行。
    2. Strictly follow the degreasing process.
    3.機械刨光。
    3. Mechanical planing.
    4.質量穩定的防腐劑需用的反應斧和配置工藝,能夠與木材固化穩定,到達防腐、健康的效果。
    4. The reaction axe and configuration process required for Preservatives with stable quality can be solidified with wood to achieve the effect of corrosion prevention and health.
    5.采用鋼制密閉儲存。
    5. Sealed steel storage.
    6.嚴格執行滿細胞滲透工藝,提高防腐劑的滲透度和固體含量,增強防腐效果
    6. Strictly implement the full cell penetration process, improve the penetration and solid content of preservatives, and enhance the anti-corrosion effect