• 電話
    聯系我們
    CONTACT US
    傳真:0531-86370030
    郵箱:870027617@qq.com
    地址:濟南解放東路29號
    熱點問題
    您當前所在的位置:首頁 - 新聞資訊 > 熱點問題 >
    防腐木花盆的制作步驟有哪些?

    來源:http://www.thecysterstory.com 時間:2020-07-13

    濟南防腐木花盆是深受園林藝術師喜愛的園林點綴元素,防腐木花架不但在園林藝術中起到美觀的作用,而且其耐腐蝕的特性也是其深受喜愛的原因之一,那么防腐木花盆是怎樣制作的呢?
    Antiseptic wood flower rack is a kind of garden ornament element loved by garden artists. It not only plays an aesthetic role in garden art, but also its corrosion resistance is one of the reasons why it is deeply loved. How is the antiseptic wood flower shelf made?
    大部分防腐木花架都是需要挖洞立柱再罐水泥,制作花架必須要兩個人不等,至于技術其中一個一定要有一定能力的木匠才可以做。
    Most of the antiseptic wooden flower trellis need to dig holes and then pour cement into the columns. It takes two people to make them. As for the technology, one of them must be a carpenter with certain ability.
    首先需要準備的材料有:
    The first materials to be prepared are:
    1:一般的花架都是四根柱,兩根柱橫檔(就是兩個連著柱子的橫檔,因為它連接著柱子的穩定,所以稱柱橫檔),其余在最上面的橫檔就看乙方怎么規定了(因為有的要寬點,有的要密點,當然如果你已經準備好上橫檔的擺放規格,你只能跟乙方說這是標準規格了)。
    1: Generally, the flower racks are four columns and two column rungs (i.e. the two beams connected to the columns, which are called column rungs because they connect the stability of the columns). The rest of the top rungs are determined by Party B (because some of them should be wider and others should be more dense. Of course, if you have prepared the layout specification of the cross pieces, you can only tell Party B that this is the standard specification )。
    2:水泥一包,小袋沙石共四袋。
    2: One bag of cement and four bags of sand and gravel.
    3:戶外耐候木油。
    3: Outdoor weather resistant wood oil.

    山東濟南防腐木花盆
    4:移動梯架。
    4: Move the ladder.
    其次準備需要的工具有:
    Secondly, the tools needed for preparation include:
    固定切割機,移動切割機,曲線鋸,角向磨光機,電鉆,鐵鉆,鐵錘(最好用鋃錘,以防在水泥地挖洞做準備),水平管,水平尺,鐵鏟,銼刀。
    Fixed cutting machine, mobile cutting machine, curve saw, angle grinder, electric drill, iron drill, hammer (preferably with a stop hammer to prepare for digging holes in cement ground), horizontal pipe, level ruler, shovel, file.
    1:給所有木材都打磨一次,或者在木料都加工完以后再打摸也可以(目的就是保持表面光滑)。
    1: Polish all the wood once, or touch it after it's finished (to keep the surface smooth).
    2:先挖好規格所定范圍內的立柱洞,一般洞挖得一樣深就可以了,當然,這跟符合要求的規格來定比較規范,再者洞的寬度跟柱材的長和寬來定,比如20*20的木材做柱,那么這個洞就需要40*40,留出的空隙給罐水泥騰出一定的空間。
    2: First dig the hole of the column within the scope of the specification. Generally, the hole should be excavated as deep as possible. Of course, this is more standardized with the specifications that meet the requirements. Moreover, the width of the hole is determined by the length and width of the column material. For example, if 20 * 20 wood is used as the column, the hole needs 40 * 40, and the space left will make room for the cement tank.
    3:給柱子最上方鋸開一個口(這個口的作用就是放柱橫檔,這樣起到一定的穩定性),兩根兩根開一個方向的口,因為兩根柱子連一根橫檔,一根橫檔連兩個柱子。
    3: Cut a hole on the top of the column (the role of this opening is to place the column rung, so as to play a certain stability), two two openings in one direction, because two columns are connected with one rail, and one rail is connected with two columns.
    4:給柱橫檔畫出你所規劃上橫檔的每個位子的空隙,再給上橫檔加工,先給上橫檔畫出一個口,也就是柱橫檔的寬度,畫在上橫檔上(好比成十字型,開一個口,只是讓它們都想依在一起),再用移動切割機開口,再用銼刀把口銼平整。
    4: Draw the gap of each position of the upper rail you plan for the column rung, and then process the upper rail. First, draw an opening on the upper rail, that is, the width of the column rail, and draw it on the upper rail (for example, make a cross shaped opening, just let them all want to stick together), then move the cutting machine to open the hole, and then file the mouth flat with a file.
    5:一般做花架為了美觀都會在上橫檔的頭開一個彎口,這時就需要曲線劇來操作了。原理很簡單,自己琢磨一下就會懂了。
    5: Generally, in order to make the flower stand beautiful, a curved opening will be opened at the head of the upper rung. At this time, the curvilinear play is needed to operate. The principle is very simple. You can understand it by thinking about it.
    6:先給兩根立柱放好柱橫檔,再給上面疊加開好口的上橫檔,先放離柱子最近的兩個口,這樣成一個口字趨勢就可以穩定了,當然最好是給四根柱子都用木板固定住,萬事都得以穩為上,畢竟是木材,扎到身上的哪個部位都不好受。
    6: First put the column rungs on the two columns, and then add the top rungs with good openings on them. First, place the two openings closest to the columns. In this way, the trend can be stabilized. Of course, it is better to fix all the four columns with boards, so that everything can be stable. After all, it is wood, and it is hard to stick to any part of the body.
    7:分兩步來做,先罐水泥,再用梯架支撐好給上木油,一般說來,到了第二天再拆除固定的板。
    7: This is done in two steps. First, cement is poured, and then the wood oil is supported by the ladder. Generally speaking, the fixed plate is removed the next day.