• 電話
    聯系我們
    CONTACT US
    傳真:0531-86370030
    郵箱:870027617@qq.com
    地址:濟南解放東路29號
    熱點問題
    您當前所在的位置:首頁 - 新聞資訊 > 熱點問題 >
    防腐木為何會開裂?應該如何處理?

    來源:http://www.thecysterstory.com 時間:2019-06-27

    隨著人們對防腐木需求的不斷增加,防腐木衍生出來的問題也隨之出現,如防腐木比其它的木材更容易開裂。防腐木為什么會開裂,這一直是讓人們為苦惱的問題,那么為什么防腐木容易開裂呢?應該如何處理呢?在此,濟南防腐木廠家小編和大家一起來了解一下。
    With the increasing demand for antiseptic wood, problems arising from antiseptic wood emerge, for example, antiseptic wood cracks more easily than other wood. Why the anticorrosive wood cracks, which has been the most distressing problem for people, then why the anticorrosive wood cracks easily? How should we deal with it? Here, Jinan anticorrosive wood manufacturer Xiaobian and everyone to understand.
    防腐木為何會開裂?
    Why do anticorrosive wood crack?
    其實,木材開裂屬于正?,F象,任何的木材都會開裂,這是我們避免不了的,因為木材本身就很容易隨著環境的變化而變化,所以出現開裂的現象也就不足為奇了。而防腐木就是一個例子,由于木材在防腐加工處理的過程中會注入大量防腐藥液,無法給防腐木足夠的風干時間,因此防腐木在使用過程中表面會流失水分,導致防腐木材水分不平衡,內外張力不均勻,出現變形、開裂等現象。
    In fact, wood cracking is a normal phenomenon, any wood will crack, which we can not avoid, because the wood itself is very easy to change with the changes of the environment, so it is not surprising that cracking occurs. Antiseptic wood is an example. Because a large amount of antiseptic liquid is injected into the wood in the process of antiseptic processing, it can not give the antiseptic wood enough air-drying time, so the surface of the antiseptic wood will lose moisture in the use process, resulting in the water imbalance of the antiseptic wood, uneven internal and external tension, deformation and cracking.
    濟南防腐木
    防腐木開裂應該如何處理?
    How to deal with the cracking of anticorrosive wood?
    我們需要前期處理和后期維護,在前期處理中,我們可以給木材足夠的風干時間,或者用烘干窯進行烘干處理,降低木材的含水率,此種方法可大大降低木材開裂的幾率,但是,木材生產周期較長,成本較高。在防腐木制品制作好后,應及時涂刷木油,保持水分。在后期維護中,尤其是對于戶外的防腐木制品,它們常年經受風吹、日曬、雨淋,更容易出現開裂、變形的問題,這就需要我們的隨時觀察與及時維護,在出現開裂問題的時候,用云石膠來填縫,然后在涂刷一層木油,就可以有效的鎖住木材內部的水分,從而減少開裂變形等現象的出現。
    We need pre-treatment and post-maintenance. In the pre-treatment, we can give wood enough air-drying time, or use drying kiln to reduce the moisture content of wood. This method can greatly reduce the probability of wood cracking, but the production cycle of wood is longer and the cost is higher. After the anticorrosive wood products are made, wood oil should be painted in time to keep moisture. In the later period of maintenance, especially for outdoor preservative wood products, they are subject to wind, sun and rain all the year round, so they are more likely to crack and deform. This requires us to observe and maintain them at any time. When cracking occurs, filling the cracks with marble glue and then painting a layer of wood oil can effectively lock the moisture inside the wood, thereby reducing the water content. The appearance of cracking and deformation.
    總而言之,防腐木制品開裂都是由于內外水分不平衡導致的,所以能平衡木材內外水分的方法都能對木材開裂起到很好的延緩效果。所以,在防腐木制品帶給大家舒適與溫暖的時候,不要忘了去維護它,延長它的壽命,創造一個美好和諧的大自然!
    In a word, the cracking of wood products is caused by the imbalance of internal and external moisture, so the method of balancing the internal and external moisture of wood can play a very good retarding effect on wood cracking. Therefore, when preservative wood products bring you comfort and warmth, don't forget to maintain it, prolong its life, and create a beautiful and harmonious nature!
    今天的精彩內容就暫且和大家介紹到這里了,如果大家還有其他想要了解的地方,歡迎大家到我們濟南防腐木廠家的官網給我們留言評論:http://www.thecysterstory.com,或者直接撥打我們的咨詢熱線,我們將給您一個滿意的答復!
    Today's wonderful content will be introduced here for the time being. If you have other places you want to know, you are welcome to leave a message and comment on our official website of Jinan Antiseptic Wood Factory: http://www.thecysterstory.com, or call our hotline directly. We will give you a satisfactory answer!