Anticorrosive wood has the advantages of anti-corrosion, which has become the choice of many people. With the more and more widely used, the manufacturers producing anticorrosive wood have also increased. Therefore, it is very important to learn to distinguish its quality, and pay attention to the method of repairing its scratches in future maintenance. Here are two aspects for you.
1、 The identification method of anticorrosive wood is very simple. You can intercept a small piece of anticorrosive wood, split it from the middle, drop a little liquid medicine, and see the penetration of liquid medicine. Generally, the penetration of liquid medicine in plate is very high. If the material is dense, it is slightly smaller. For materials with a thickness of more than 10 cm, the penetration of liquid medicine shall be 80% lower. The wood infiltrated with liquid medicine shall be brown to cyan and green, otherwise it will be unqualified products. Antiseptic wood also has three basic functions of termite prevention, fungus prevention and corrosion prevention. Therefore, it must be clearly identified when purchasing.
Two. There are occasional slight abrasions on the surface of the antiseptic wood, and the paint film falls off. It can be slightly mended by the color pen in the antiseptic wood color, then slightly coated with a thin layer of colorless transparent nail polish. The original anticorrosive wood can also be repaired with paint; When the colored wooden dining table and chair are scratched, the dye can be used to make up the color at the injured place. After the dye is dry, the upper layer of bright wax can be evenly applied to restore the original appearance.
The above is about identifying the quality of anticorrosive wood and the method of repairing scratches. I hope it can help you. If you want to buy anticorrosive wood, you can contact us. We will serve you wholeheartedly and look forward to your visit.