• 電話
    聯系我們
    CONTACT US
    傳真:0531-86370030
    郵箱:870027617@qq.com
    地址:濟南解放東路29號
    公司要聞
    您當前所在的位置:首頁 - 新聞資訊 > 公司要聞 >
    防腐木花架的制作流程和特點

    來源:http://www.thecysterstory.com 時間:2021-05-31

    防腐木涼亭在原木材挑選上:精選等級高的木材,通過高溫蒸煮去脂后烘焙,達到殺蟲、滅活的效果,讓原木細胞死掉,使木材不會由于溫度濕潤程度的變動而變型出現裂縫和孳生蟲菌。
    In the selection of raw wood for preservative wood Pavilion: select high-grade wood and bake it after high-temperature steaming and degreasing, so as to achieve the effect of killing insects and inactivating, so that the cells of the log will die, and the wood will not appear cracks and breeding insects due to the change of temperature and humidity.
    其次,結構預設上:
    Secondly, on the structural presupposition:
    1.防腐木涼亭**蓋采用三層*處置,**的**層板采用直板疊壓作法或是仿琉璃瓦片的作法。半中腰鍍鋅鋼板起到防雨功能,底層采用薄插接板避免因熱脹冷縮引動內**出現裂縫,**蓋再安裝上封雨的脊瓦和寶**,該結構防雨防潮效果俱佳,又不易變型。工藝復雜,要求精 密細致度較高。
    1. The anti-corrosion wooden pavilion cover adopts three-layer treatment, and the * * layer board of * * adopts straight plate lamination method or imitation glass tile method. The half waist galvanized steel plate has the function of rainproof. The bottom layer adopts thin plug-in plate to avoid cracks caused by thermal expansion and cold contraction. The back tile and treasure are installed on the cover to seal the rain. The structure has good rainproof and moisture-proof effect, and is not easy to change. The process is complex and requires high precision.
    濟南防腐木花架
    2.防腐木涼亭的支撐柱為克服木料本身易出現裂縫的欠缺而采用鑲拼結構的作法,人工刨光。
    2. In order to overcome the lack of cracks in the timber itself, the supporting column of the antiseptic wood pavilion adopts the method of inlaying structure and manual planing.
    3.防腐木涼亭
    3. Antiseptic wood Pavilion
    a)依據事情狀況普通配有地板,柱子與柱子之間也會有有坐板、靠背銜接??勘巢捎没⌒巫鞣ǖ脑?,使人靠上去舒服安逸**。
    a) According to the situation of things, the floor is usually equipped, and there will also be sitting boards and backrests between the columns. If the back is curved, it will make people comfortable and comfortable.
    b)同時配有古典窗格起到扮飾和加固效用。
    b) At the same time, it is equipped with classical panes for decoration and reinforcement.
    c)做事精 密細致的話,**蓋普通配有翹角的局部可以做到大幅度翹曲,好看?;蚴翘暨x純手工鐫刻的*翹角等代表吉祥吉祥器物。立柱上也可以挑選配上純手工鐫刻的鳳雕或獅雕等,高大華麗。
    c) If you do things in a precise and meticulous way, the part of the cover with a warping angle can be warped and good-looking. Or select the pure hand carved * Qiaojiao to represent the auspicious and auspicious objects. Columns can also be selected with pure hand carved Phoenix carving or lion carving, tall and gorgeous.
    4.防腐木結構的多層防腐木涼亭均為*常理產品,涼亭底盤平面或物體表面的大小大,且*高,這為出產和動工帶來了幾何級的困難程度
    4. The multi-layer anti-corrosion wood pavilion with anti-corrosion wood structure is a common product. The size of the chassis plane or object surface of the pavilion is large and * high, which brings geometric difficulty to production and construction
    a)選材上:
    a) Material selection:
    全部材料十分難?。ㄖ?、橫梁、瓦片、支架等尺寸過大,市場上木材沒有辦法滿意條件),此規格材料務必去林場單*鋸料,運送難,成本高,額外材料利用率十分低。
    All the materials are very difficult to get (the size of columns, beams, tiles, supports, etc. is too large, and there is no way to satisfy the conditions of wood in the market). This specification of materials must be sent to the forest farm for single sawing, which is difficult to transport, high cost, and low utilization rate of additional materials.
    b)操作上:
    b) Operation:
    (1)木材大小過大,木匠制造不便,耗費功夫消耗時間,同時要克服多道技術因難關口,既要保障產品的實用性又有好看度。不可缺少時,組裝調整和在場安裝涼亭時須由吊機輔佐。
    (1) The size of wood is too large, it is inconvenient for the carpenter to make, and it costs time and effort. At the same time, it is necessary to overcome many technical difficulties, so as to ensure the practicality and good appearance of the product. When necessary, the crane shall assist in the assembly, adjustment and field installation of the pavilion.
    (2)全部產品在出產完結務必組裝調整,再拆開防腐,都增加了數量多成本。
    (2) All products must be assembled and adjusted at the end of production, and then disassembled for anti-corrosion, which increases the quantity and cost.
    (3)產品太大,相對刷漆、包裝、運費、裝卸及實地組裝都增加了困難程度,成本也是常理的數倍。
    (3) The product is too large, which makes it more difficult than painting, packaging, freight, loading and unloading and field assembly, and the cost is also several times that of common sense.