• 電話
    聯系我們
    CONTACT US
    傳真:0531-86370030
    郵箱:870027617@qq.com
    地址:濟南解放東路29號
    公司要聞
    您當前所在的位置:首頁 - 新聞資訊 > 公司要聞 >
    濟南防腐木的安裝方法是什么?

    來源:http://www.thecysterstory.com 時間:2020-08-05

     1. 可移動的鋪設方法:
      1. Movable laying method:
      (1)防腐木正面與龍骨采用不銹鋼十字螺絲連接;
      (1) the anti-corrosion wood front and keel are connected with stainless steel cross screws;
      (2)將龍骨用螺絲固定在防腐木上,將幾塊復合在一起成為一個整體,既不損壞地上的結構,又可自由拆卸和清洗;
      (2) fix the keel on the anti-corrosion wood with screws, and combine several pieces to form a whole, which will not damage the structure on the ground, but also can be disassembled and cleaned freely;
      2、固定敷設方法:膨脹螺絲將龍骨固定在地面上,膨脹螺絲采用尼龍材料(抗老化性較好),鐵膨脹管應涂防銹漆,再鋪防腐木。
      2, fixed installation method: expansion screws fixed the keel on the ground, the expansion screw was nylon material (anti-aging better), the iron expansion pipe should be painted with anti rust paint, and then covered with antiseptic wood.
      3、吊架敷設方法,龍骨在地面找平后可連接成框架/框架結構,再鋪設防腐木。
      3. Hanger laying method: after the keel is leveled on the ground, it can be connected into a frame / frame structure, and then anti-corrosion wood is laid.
      (1)木結構基層處理:在規劃和施工中應充分堅持防腐木與地面之間的空氣循環,這樣更有利于延長木結構基層的使用壽命。
      (1) base treatment of wood structure: the air circulation between anti-corrosion wood and the ground shall be fully adhered to in the planning and construction, so as to extend the service life of the base of wood structure.
      (2)防腐木在制作過程中,防腐木之間應留有0.2-1cm的間隙(間隙大小根據木材含水率確定;當木材含水率超過30%時,最好不超過0.8cm),以防止雨天積水和防腐木材膨脹;
      (2) in the process of making anticorrosive wood, a gap of 0.2-1cm shall be left between the anticorrosive wood (the gap size shall be determined according to the moisture content of the wood; when the moisture content of the wood exceeds 30%, it is better not to exceed 0.8cm), so as to prevent water accumulation in rainy days and expansion of the anticorrosive wood;
      (3)厚度大于50mm或大于90mm的方柱可在反中心開槽,以減少開裂。
      (3) square columns with thickness greater than 50mm or 90mm can be slotted in the reverse center to reduce cracking.
      (4)五金件采用不銹鋼、熱浸鍍鋅或銅(為防止銹蝕,應先連接,并影響連接牢度)連接裝置,請提前鉆孔,以防銹蝕木材開裂。
      (4) the hardware shall be connected by stainless steel, hot-dip galvanizing or copper (to prevent corrosion, it shall be connected first and affect the connection fastness). Please drill in advance to prevent the wood from cracking.
      (5)盡量使用現有的尺度和外形,對損壞部位使用防腐劑和現場防護漆;后防腐木材本身是一個半成品,粗糙的部分可以在商店里,如木材含水率低于20%,砂光,如果你想有一個更好的效果,可以涂完清潔外觀領域保護涂層(如顏色保護涂層應該精力充沛的攪拌)。如遇下雨天,最好使用塑料布覆蓋,如重新刷過田間防護漆后天氣晴朗。注意:涂層應在雨后24小時內預防。
    山東防腐木
      (5) try to use the existing size and shape, and apply preservative and on-site protective paint to the damaged parts; the post anticorrosive wood itself is a semi-finished product, the rough part can be in the shop, such as the moisture content of wood is less than 20%, sanding, if you want to have a better effect, you can finish the protective coating in the field of clean appearance (such as the color protective coating should be vigorously stirred). In case of rain, it is better to cover with plastic cloth, for example, it will be sunny after the field protective paint is repainted. Note: the coating should be prevented within 24 hours after rain.
      (6)表面涂上后現場保護涂層或油性涂料(只有一次),以達到最好的效果,在48小時內,以防止人員步行或搬重物,避免損傷防腐木材表面形成的保護膜層。如果想要獲得更好的防污效果,需要對表層進行兩次特殊的現場清漆處理。
      (6) after the surface is coated, the on-site protective coating or oily coating (only once) shall be applied to achieve the best effect. Within 48 hours, it is necessary to prevent people from walking or lifting heavy objects, and avoid damaging the protective film formed on the surface of anticorrosive wood. If you want to get better antifouling effect, you need to carry out two special field varnish treatments on the surface.
      (7)由于防腐木材在野外使用環境中的特殊性,防腐木材會出現裂縫、細微變形和正?,F象,不影響其防腐性能和結構強度。
      (7) due to the particularity of antiseptic wood in the field, the antiseptic wood will have cracks, slight deformation and normal phenomenon, which will not affect its antiseptic performance and structural strength.
      (8)一般現場木材防護涂層是透水性的,在木材纖維中會構成一層防護嗎?膜,可有效防止木材被水腐蝕,清洗時可用一般清潔劑清洗,東西可用刷子刷。
      (8) generally, the wood protective coating on site is water permeable. Will it form a protective layer in the wood fiber? The film can effectively prevent the wood from being corroded by water. When cleaning, it can be cleaned with general detergent, and things can be brushed with brush.
      (9)一年一次至一年半保護;使用特殊的木器水性涂料或油性涂料涂刷即可。
      (9) once a year to one and a half years protection; use special wood water-based coating or oil-based coating to brush.