• 電話
    聯系我們
    CONTACT US
    傳真:0531-86370030
    郵箱:870027617@qq.com
    地址:濟南解放東路29號
    公司要聞
    您當前所在的位置:首頁 - 新聞資訊 > 公司要聞 >
    防腐木油漆施工注意事項!

    來源:http://www.thecysterstory.com 時間:2020-03-13

    你對防腐木了解多少?在使用防腐木時有哪些注意事項:
    What do you know about antiseptic wood? What are the precautions when using anticorrosive wood:
    1、在施工現場,木側必須堆放在每層10-12毫米的間隙內,并防止雨水或陽光直射。
    1. At the construction site, the wood side must be stacked in a gap of 10-12mm for each layer and protected from rain or direct sunlight.
    2、在施工中,可采用防腐木現有尺寸,如切割、鉆孔等,必須采用防腐劑進行刷補,以保證防腐層的完整性。
    2. In the construction, the existing size of anticorrosive wood can be used, such as cutting, drilling, etc., and preservative must be used for brush repair to ensure the integrity of the anticorrosive coating.
    3、應在接頭處進行預鉆孔,以減少裂縫。
    3. Pre drilling shall be carried out at joints to reduce cracks.
    4、所有連接必須使用熱鍍鋅緊固件或不銹鋼五金件以防腐蝕。
    4. Hot dip galvanized fasteners or stainless steel hardware must be used for all connections to prevent corrosion.
    5、搭一個平臺和棧道,盡量用長木板,以減少接縫美觀。板之間應留有3-7mm的間隙。
    5. Set up a platform and plank road, and try to use long plank to reduce the beautiful joint. There should be a gap of 3-7mm between plates.
    防腐木和碳化木之間的差異
    6、防腐木用膠粘劑應防水、耐候。
    6. The adhesive for anticorrosive wood shall be waterproof and weather resistant.
    7、室外施工應做好養護工作,如刷木油,避免因日曬雨淋造成木材開裂和變形現象。
    7. Maintenance work shall be done well in outdoor construction, such as brushing wood oil to avoid wood cracking and deformation caused by sun and rain.
    8、油漆時,必須選用水性防紫外線油漆,潮濕的木材表面不應油漆。
    8. When painting, water-based UV resistant paint must be selected, and the wet wood surface shall not be painted.
    9、木方厚度大于35mm,為防止其變形,可在芯側中心線開一條寬、深約10mm的小曹。
    9. The thickness of the batten is more than 35mm. In order to prevent its deformation, a small Cao with width and depth of about 10 mm can be opened at the center line of the core side.
    10、應在不同的使用環境(如地面、地下或水中)中使用不同等級的防腐木材,以確保達到設計使用壽命。
    10. Different grades of preservative wood shall be used in different environments (such as ground, underground or water) to ensure the design service life.