The external quality of the antiseptic wood of the antiseptic wood manufacturer is particularly good. To eliminate the problem of overstock of external force, then the internal pressure will lead to deformation. If the moisture inside the antiseptic wood is too high, it has not been dried together. After a long time in natural conditions, it will naturally change from dry to wet. The exterior will dry first, and then the interior will dry slowly.
Because the wood has no extensibility, when the exterior is dry, the exterior volume will be smaller, but the interior is not dry, and the volume is still so large, so the reduction of the exterior volume can only be balanced through cracking and deformation. The deformation of wood is caused by the internal pressure, and the cracking of wood is caused by the new change of wood appearance, but the root cause of the change is the change of moisture content in wood.
Then how can we deal with the deformation of the anticorrosive wood? The anticorrosive wood manufacturer will tell you.
1. Before construction, try to wait until the anticorrosive wood is dry to the standard value before using.
2. In the process of construction, the protection work should be done well, too much moisture should not be allowed to enter into the anti-corrosion wood in Nanjing, and the moisture-proof problem should be noted.
3. Select high-quality coating, after all, as long as good coating can do the corresponding moisture-proof operation, if the coating is damaged, it must be repaired in time.
4. When laying anticorrosive wood, it is usually required to make products with a certain amount of gaps. Of course, in the use of time to prevent the temperature suddenly high and low, to maintain the temperature balance, for summer or winter to pay attention to timely cooling or heating.
The antiseptic wood floor can taste the relatively bad environment very well, do not have to bother to take care of, this is also the reason that is loved by consumers. Of course, when choosing, we should pay attention to the purchase of qualified products.